First of all, it is important to check all the parts after the split AC system arrives at your place and try to identify all of them against the bill of material which has been supplied by the manufacturer.
Proper split air conditioning installation is necessary in order to get best out of them, because if such AC is not installed in a proper manner then it will not work as per its best efficiency.
It is also necessary that you must hire an expert professional in this field who has enough experience of installing split AC. Hiring any novice for such work will be very risky as you may not get the required cooling.
- Check wall strength where AC will be installed
It is necessary to check the wall strength as well as its thickness before you try to install them on the wall. While running these ACs, it may produce certain amount of vibration and any weak wall may develop crack or damage after a long run.
Therefore, ensuring the wall strength is extremely important.
- Space available between the wall and AC
While you install indoor unit of the AC then it is important to check that you have at least 15 to 20 cm of space available from all sides of the AC unit.
This space is needed for facilitating the installation as well as uninstalling them in case it needs to be repaired in future.
- Height of the AC to be installed from ground
In order to get enough cooling inside your room, it is necessary that the indoor unit of the AC is installed at a height of 7’ to 8’ above the ground level. You need to check that you can comfortably fit the AC unit on the wall.
- What should be the tilt angle of the indoor unit
When you will fix the bracket for mounting the indoor unit, make sure that you must tilt is at slight angle so that condensed air can flow out from the indoor unit without any restriction.
- Suitable location of the outdoor unit
In order to get proper amount of cooling, it is necessary that your outdoor unit must be fixed at such place where there should not be any direct sun light or water exposure on the outdoor unit. It must also be protected from rainwater.
- Placement of the outdoor unit
It is essential that the outdoor unit must be fitted on surface which is flat as well as rigid enough to hold weight of the unit. Since most of the key components are placed within the outdoor unit that will produce lots of vibration.
If the location is not chosen carefully then it may result in damage of the pipes or it can create lots of noises.
- Selecting proper distance between indoor outdoor unit
In order to obtain sufficient amount of cooling, it is necessary that there must be adequate amount of distance exists between indoor outdoor units.
In order minimize the loss of cooling, and it is important that the distance between indoor unit and outdoor unit must be the least.